Construction Equipment
Screed Vibrator Model No. SV-7
Batch Capacity
Designed to Suit The Purpose For Both Compacting and Leveling The Concreate
Chassis
4.2 & 6.2 Mtr.
Power Unit
1.5 H.P. Electric Motor / 1.5 P/K Engine
Sand Siever Model No. SS-14
Sand Siever
This Component Has A High Production Rate And Is Portable Making Its Operation Simple.
Specifications
Wire Mash Changable
Tyre
3 X 50 X 8 With Double “Z” Type Ball Bearing.
Sieve Size
60', 48' , 36' , 24'
Lenghth
6' X 24' DIA
Power
1 H.P.Single Phase Electric Motor with Gear Box
Pan Mixer Model No. PM-16
Capacity
300/500 Kg Material
Discharge
Manual Bottom Door Opening.
Mixing
By Faced Four Hard Scrappers
By Faced Two Hard Scrappers & Rollers.
Bottom Plate Thickness 10 mm, Linear 5 mm
By Faced Two Hard Scrappers & Rollers.
Bottom Plate Thickness 10 mm, Linear 5 mm
Power Unit
10 H.P. Crompton Make Electric Motor.
Flyash Brick Plant Model No. FBM-10
1, Pan Mixer
Batch Capacity
Capacity 500 Kg. Material
Manual Discharge
Bottom Door Opening (Manual)
Mixing
By Heavy Rollers And Hard Faced Scrappers.
2- Vibro Press (Brick & Block)
2- Vibro Press (Brick & Block)
Capacity
8000-10,000 Brick Per 8 Hour (Approx)
Size: 230 X 110 X 75 mm
Size: 230 X 110 X 75 mm
Power Unit
15 H.P. Air Cooled Diesel Engine Or 10 H.P. Electric Motor.
Use
Vibro Press Is Used Induvidial & Attached Pan Mixer (In Bothways).
Needle Vibrotor Model No.NV-7
Batch Capacity
Designed to Suit All Types of Site Conditions, The High Frequency of 16,000 VIB/MIN,
Ensures use for Perfict Concrete Mixture of Different Grades,
Ensures use for Perfict Concrete Mixture of Different Grades,
Chassis
(1) Needle : 25 mm, 40 mm, 60 mm,
(2) Flexible Shaft 4m Or 6m In Length.
(2) Flexible Shaft 4m Or 6m In Length.
Power Unit
(1) 1.5 H.P. Or 3 H.P. Petrol Engine,
(2) 2 H.P. Single Phase Electric Motor.
(2) 2 H.P. Single Phase Electric Motor.
Vibrating Plate Compactor ( Model No. Ec-12)
Plate Size
610 X 445 mm. (24 X 18 Inch.)
Compacting Surface
0.26.Sq. Meters. (2.88.Sq.Ft.)
Height
648 mm. (25.5 Inch.) With Handle Extension Removed
Width
630 mm. (28 Inch.) Weight : 150 Kg. (Approx.)
Centerifugal Force
1.811 Kg. (3.994 Ids.) (Vibrating Unit)
Vibration Frequency
5600 V.P.M. Maximum
Forwarding Motion
14 To 20 Meters Per Minute (45 To 85 Per Min.)
Depending Upon Back Till Or Surface Conditions.
Depending Upon Back Till Or Surface Conditions.
Power
3 Phase Electric Motor & 3.5 H.P. Air Cooled Diesel Engine.
Groove Cutter Model No. GC-13
Groove Cutter
Is Use For Cutting Concrete Groove
Water
40 Ltr. tank.
Power Unit
7.5 H.P. 2880 R.P.M. Electric Motor
Single Wheel & Double Wheel
Double Wheel
Single Wheel
Capacity
½ Bag Material (For Two Wheel) & ¼ Bag Material (For Single Wheel).
Trolley Bucket
The Mild Steel Fabricated 1.63 Mm Thick.
Base Frame
40 X 40 X 6 Angle.
Handle
Pipe Od 30 mm & Thickness 2.64 mm.
Tyre
3 X 50 X 8 With Double “Z” Type Ball Bearing.
Materials Carrying Box Model No. Cb-18
Cube Mould Model No. CM-17
Mixer Mahine with Attached Lift (Model No. MWL-16)
Machine
With hydraulic hopper & without hopper
Batch capacity
(450 ltr.unmix / 400 ltr. Mix.) , 8 to 10 cu.mt. /hr.
Chasis
Heavy steel section has been used for durability.
Mixing drum
22 to 25 rpm, specially shaped mixing blade are Provided for efficient mixing.
Drum base
Cast iron 28mm thick, trb + bush type.
Drum upper cone
The mild steel fabricated 4mm thick.
Engine cabinet
The mild steel fabricated 1.63 mm thick.
Tyre
600-16 four pneumatic wheel & double channel axle
Power
10hp a/c. Diesel engine or 10hp electric motor.
Hopper
3.15mm thick mild steel, hudraulic jack operated
Lift bucket
400 ltr storage tilting type 3.15mm thick m.s.
Lift operated
Winch & clutch type manual
Lift height
45 feet with 12mm wire rope
Monkey Lift
Product Details
Our Monkey Hoist Machine is basically useful in the construction of multi story buildings
for lifting of bricks cement bags and concrete etc. We have a wide range of Monkey Hoist
Machines or Mini Cranes, with the lifting capacity from 300kg, for height of 10Feet to 100Feet.
We are one of the prominent engineering houses engaged in the development of mini cranes
that are fabricated in tandem with the latest technological advancements. Owing to their design,
these cranes allow easy access to sites, where other cranes may fail. These cranes are basically used in construction sites for lifting of bricks, steel, concrete, sand, cement and tiles.
Acknowledged for their reliable service life, safe operation and compact dimensions, these can be availed from us at competitive prices.
for lifting of bricks cement bags and concrete etc. We have a wide range of Monkey Hoist
Machines or Mini Cranes, with the lifting capacity from 300kg, for height of 10Feet to 100Feet.
We are one of the prominent engineering houses engaged in the development of mini cranes
that are fabricated in tandem with the latest technological advancements. Owing to their design,
these cranes allow easy access to sites, where other cranes may fail. These cranes are basically used in construction sites for lifting of bricks, steel, concrete, sand, cement and tiles.
Acknowledged for their reliable service life, safe operation and compact dimensions, these can be availed from us at competitive prices.
Capacity
300kg. Loading bucket
Bucket
3.15mm thick mild steel square type
Winch
Mild steel pipe inclusive steel bar ball bearing type
Wirerope
12mm thick tested wire
Gear box
Reduction type
Power unit
3 or 5 hp electro magnetic brake type motor, 1 or 3 phase
Lifting height
10feet to 100feet
Height capacity
*50feet, *75feet, *100feet